Agricultural Drones Seed Oyster Beds in Texas and Florida

Heavy-lift drones are being deployed in Texas and Florida to rapidly seed oyster beds, creating fresh possibilities for coastal restoration and aquaculture.
by DRONELIFE Features Editor Jim Magill
Entrepreneurs are repurposing material-spraying UAVs, traditionally used to distribute fertilizer, insecticide, and seed across farmland, to plant oyster beds in shallow coastal waters in states like Texas and Florida.
Last June in Texas, a project released over one million juvenile oysters into privately leased growing zones within Galveston Bay. Jeri’s Seafood, which holds the leases and operates as a commercial harvester, partnered with the nonprofit Palacios Marine Agriculture Research to cover approximately five acres of beds using an XAG agricultural drone.
Justin Woody, Vice President at Jeri’s Seafood, stated that he believed this event represented the first commercial oyster seeding by drone in the state. The Texas State Legislature enacted a law in 2025 that permits the placement of cultivated oysters into both natural and private oyster beds.
The primary challenge was determining the most efficient and cost-effective method to distribute baby oysters uniformly across the beds. Woody indicated that he had identified the solution.
"A bunch of my buddies grow rice. I was already familiar with ag drones," he said.
Collaborating with a UAV provided by ProTexAG, an agricultural drone firm based in Belton, Texas, the team dispersed the seeds in 20 minutes. Woody noted that several months must pass before the success of the seeding effort can be confirmed.
He explained that reaching market size, defined as approximately three inches, requires 18 to 24 months, depending on variables like water depth and temperature.
From the fields to the bay
Erik Olsen, who leads flight operations and owns ProTexAG, observed that while the Galveston Bay project resembled many previous seed-planting efforts, it marked the first time his team launched an agricultural drone from a boat. Yet, the change in launch platform was not the most significant hurdle.
"If you’re flying off a large platform, it’s easier than flying off a trailer because the boat was much bigger than a trailer," he said. The oyster seeds themselves presented major challenges due to their fragility and high cost.
"They’re easy to break and crush, so having the proper auger size was important," Olsen said. He noted that with a payload value of about $30,000, the cost was significantly higher than that of typical land-based seed distribution.
"So, any mistakes, overuse in one area or improper calibration, you can waste a lot more money quicker than if it was just $5 worth of seed and a big grass field or something."
Olsen said the team utilized a drone manufactured by XAG, a China-based company recognized as a global leader in agricultural drones. He pointed out that China has established an early advantage over the U.S. in deploying drones within its agricultural sector.
"The automation is definitely there and it’s coming to the States. We’re probably two years behind China right now, just with how long it takes to get stuff approved here."
Florida pioneers drone use in oyster seeding
In the U.S., this technique originated in Florida in 2024. Environmental restoration firm AquaTech Eco Consultants collaborated with the Aquatic Restoration and Conservation Association and the Florida State University Coastal and Marine Lab to restore oyster habitats in Apalachicola Bay, located in the state’s Panhandle region.
Beau Williams, founder and President of AquaTech Eco Consultants, explained that the company, which restores both fresh and saltwater habitats, initially engaged in oyster bed reclamation by recycling shells gathered from restaurants. The company later switched to heavy-lift drones to reach shallow-water areas that are difficult to access by other methods.
"I think we’re the first ones to put out live animals into an estuary," Williams said.
The company operates Hylio heavy-lift drones, which are designed and manufactured in Richmond, Texas.
"They’re 100%, made here in America. We use basic drone off-the-shelf components from Hylio. They have fertilizer spreaders; they have liquid applicators. They have their own proprietary software that actually flies the drones," he said.
Williams stated that flying an agricultural drone to seed oyster beds is comparable to using the same UAV for land-based agricultural tasks. "We use basic off-the-shelf drone components from Hylio," he said.
However, he highlighted a critical distinction: unlike land-based seed-spraying drones, heavy-lift oyster-seeding drones do not meet the definition of agricultural UAVs. Consequently, they may be prohibited from flight if they exceed 55 pounds unless they receive a special exemption from the FAA.
In a statement, an FAA spokesman said, "A Section 44807 exemption could be a path for this operation but not under a Part 137 agricultural exemption. Oyster bed seeding is not considered agriculture, so the operator would need a Part 91 exemption and would have to follow all safety and airspace rules, including the rule on dropping objects safely."